Featured Posts

  • Prev
  • Next

Display port adaptors part 2

Posted on : 10-06-2013 | By : Mark | In : Computer/Gaming stuff

0

We I finally received the Dell/Bizlink Dual port DisplayPort to DVI adaptor andĀ Sapphire mini DP to DVI adaptor and both functioned out of the box with no Gremlins.

 

I then went on to make a couple of stands to take up the height difference between my IIYAMA and Viewsonic (in the centre) monitors.

A simple piece of 10mm perspex cut to shape to allow IIYAMA monitor stands to sit on top, with addition of a row of tapped holes into which I fitted M4 perspex screws to facilitate heigh adjustment, this was illuminated from the rear by 3 LEDs to give a little glowing finishing touch.

 

[singlepic id=276 w=320 h=240 float=left][singlepic id=278 w=320 h=240 float=]

Comments are closed.